saw components saw rf filter tetra receiver series/type: ordering code: b5324 B39421B5324Z810 date: version: nov 03, 2014 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 nov 03, 2014 b5324 415.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet application n low-loss rf filter n unbalanced to balanced operation n usable passband 30 mhz n no matching required for operation at 50 w features n package size 3.8 x 3.8 x 1.5 mm 3 n package code qcc8b n rohs compatible n approximate weight 0.070 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 1 n filter surface passivated pin configuration n 5 input unbalanced n 1, 2 output balanced n 3, 4, 6, 7, 8 to be grounded
3 nov 03, 2014 b5324 415.0 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C10 ?c to +50 ?c terminating source impedance: z s = 50 w (unbalanced) terminating load impedance: z l = 50 w (balanced) min. typ. @ 25 ?c max. center frequency f c 415.0 mhz maximum insertion attenuation a max 400.0 ... 430.0 mhz 3.3 3.8 db amplitude ripple (p-p) da 400.0 ... 430.0 mhz 1.5 2.0 db input vswr 400.0 ... 430.0 mhz 1.6:1 2.0:1 output vswr 400.0 ... 430.0 mhz 1.7:1 2.0:1 absolute attenuation a abs 10.0 ... 345.0 mhz 34 47 db 345.0 ... 390.0 mhz 10 12 db 440.0 ... 470.0 mhz 8 12 db 470.0 ... 480.0 mhz 23 29 db 480.0 ... 561.0 mhz 35 43 db 561.0 ... 593.0 mhz 38 44 db 593.0 ... 800.0 mhz 36 38 db 800.0 ... 1200.0 mhz 30 34 db 1200.0 ... 1924.0 mhz 25 31 db 1924.0 ... 2046.0 mhz 25 31 db 2046.0 ... 4000.0 mhz 15 22 db
4 nov 03, 2014 b5324 415.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet maximum ratings operable temperature range t C10/+50 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 0 v esd voltage v esd 50 1) 1) acc. to jesd22-a115b (mm - machine model), 10 negative & 10 positive pulses v machine model input power p in 400.0 ... 430.0 mhz 15 dbm cw, 100000 h, 50 ?c
5 nov 03, 2014 b5324 415.0 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function (s21, narrowband) transfer function (s21, wideband)
6 nov 03, 2014 b5324 415.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet smith charts s 11 function s 22 function
7 nov 03, 2014 b5324 415.0 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. references type b5324 ordering code B39421B5324Z810 marking and package c61157-a7-a46 packaging f61074-v8229-z000 date codes l_1126 s-parameters b5324_nb.s3pb5324_wb.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
8 nov 03, 2014 b5324 415.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
